High Lifter Signature Series Lift Kit

Part Number: PLK800R-50

• Relocate your shock mounts and get the lift need for tighter suspension and larger mud tires
• Increase your ground clearance and make room for larger tires to dig deep and ride hard in most any terrain
• Bolt-on application with user friendly instructions and all hardware needed for a successful installation is included; takes approximately 1-2 hours for install
• Precision Cut and Zinc plated Front and Rear Lift Kit
• Made in the USA

The High Lifter Lift Kit for the Honda Recon 250 will relocate your shock mounts and get the lift need for tighter suspension and larger mud tires. Take your ATV to the edge with High Lifter’s 2” Lift Kit which is now Bigger, Badder and now even BOLDER than ever. Our engineers and staff have spent over 15 years perfecting the ultimate ATV lift kit. An easy-to-install, bolt-on lift that consistently measures truer over competitor products. Bolt-on application with user friendly instructions and all hardware needed for a successful installation is included; takes approximately 1-2 hours for install. Each Lift Kit part is precision cut and zinc plated for durability and reliability in any environment. 

Tire Fitment: Up to 28".

Notes:

• 1.5" spacers are recommended, but a MINIMUM of a 1" wheel spacer is required. -If you are running wide tires a 1.5" or wider spacer may be required depending on the width of the tire for tire to shock clearance at full lock steering. 
• New Rear High Lifter Outlaw DHT Axles, High Lifter Pro Series Axles, or Gorilla CV Axles are recommended for the 2011-2014 Ranger models before installing ANY brand of lift kit. 
• The 2011-2014 model rangers have lighter duty rear axles than previous year models and are more prone to breakage. 
• High Lifter's Pro Series Alignment Kit (PSAK-1) is REQUIRED if you own or are buying PLK800R-50 or ANY brand of Ranger lift kit and have upgraded or are upgrading to the Pro Series Ranger Tie Rod/Rack End Kit. 
• This kit also upgrades from the OEM 10mm bolt to a 1/2" Gr. 8 bolt to match the heavy-duty heim joint in our Tie Rod/Rack End Kit. The alignment kit comes with 2 alignment cones and all hardware required to upgrade both sides of the Ranger.